Comm-Tec ProTUNE TXT User Manual download pdf (Page 15)

22K: Use [VOL34] to select “ON” or “OFF”. The 22kHz signal is used at KU Universal LNB to switch

between low and high frequency band.

! NOTE: If you set the LNB type to Universal, you cannot change 22K.

DiSEqC1.0: Press [VOL34] to switch DiSEqC switch options: disable / LNB1 / LNB2 / LNB3 / LNB4

2. Polarization: Press [VOL34] to select between: Auto / H / V / OFF.

3. Transponder: Press [VOL34] to select the desired transponder.

With the help of signal strength and quality display, you can check if your settings were successful.

The respective changes are being saved by [YES]

3.1.2 Satellite List

If you select “Satellite List”, you will see the following window:

1. Press the red key to edit the satellite. You can edit the name of the satellite and its longitude

with the respective color, and [CH56 VOL34] buttons.

In this dialog, use the [Red] key for case-sensitive, [Green] to delete, [Yellow] to confirm and

[Blue] to exit the menu.

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 58 59

No comments

Comm-Tec ProTUNE TXT User Manual Page 15